Drain and Grease Trap Treatment

rapidly degrade Fats, Oils and Grease in wastewater systems

  • Environmentally friendly, economical and effective
  • Safe for all pipes, drains, fittings, wastewater systems and receiving environments
  • Contains added Lipase, Cellulase, Protease and Amylase enzymes

DGTT will rapidly degrade the pollutants in the waste stream reducing maintenance and eliminating odours in the collection system.

Problem
Fat, Oil and Grease deposits build up, clogging drains, pumps and Fats, Grease traps

Result
DGTT rapidly degrades Fats, Oils and Grease with naturally-occurring and non-toxic bacteria.

A Microbial Formula for Industrial & Municipal Systems

DGTT is designed specifically to rapidly degrade Fats, Oils and Grease (FOG) in wastewater systems including all forms of grease traps, waste sumps, re-circulation cleaning systems, storage lagoons and biological wastewater treatment plants. DGTT is a highly active microbial-based formulation containing proprietary cultures that are extremely effective in dealing with overloaded FOG systems.

DGTT’s unique microbial-based treatment formula also speeds the biological oxidation process of slow to degrade organic matter resulting in improved water quality and significantly reduced BOD, COD and SS in the final effluent. In addition, DGTT has shown the ability to control biologically produced odours and corrosive compounds throughout the system and sewerage network.

Containing only active, non-toxic, naturally-occurring bacteria. DGTT significantly speeds up the microbial response in organic waste that is difficult to degrade. This enhanced microbial response results in a significant reduction in grease sludge, clearer lines and a liquefied slurry that is much easier to pump. DGTT promotes enhanced microbial oxidation of waste matter, significantly increasing organic degradation performance.

DGTT Effects

  • Rapid break down of Fats, Oils and Grease.
  • Liquefies FOG solids, assuring quick and easy pumping.
  • Provides reductions in final effluent BOD, COD, and TSS.
  • Reduces and controls system odour.

Directions

  • Use at 5 to 20/ppm, based on daily flow or system volume.
  • For enhanced performance treat undiluted directly into grease trap.
  • Add directly to the inlet of the system being treated.

OR Contact your Parklink Consultant to work out the best program for treating your situation. Call us on (+64) 06 843 2913

What to Expect from DGTT

  1. Reduction in solids
  2. Clean pipes and no fat buildup or pipe clogging
  3. Unclogging outflow water to leach drains
  4. Fat digestion
  5. Greatly reduces odours
  6. Reduces the need for pump outs  and easier to pump

The largest consortium multi-strain bacteria in the industry

Our bacteria are extremely efficient for several reasons.

Genus(type)What problems they solve
NitrobacterNitrites
NitrosomonasNitrogenous waste like, ammonia
NitrococcusNitrites
ComamonasAromatic hydro carbons
BacillusSimple and aromatic hydrocarbons
SaccharomycesPhosphorous, carbon, ammonia
Purple Sulfur bacteriaSulphorous
PseudomonasAromatic hydrocarbons
AlcaligenesNitrates
CitrobacterSimple and aromatic hydrocarbons, nitrates
FlavobacteriumSimple hydro carbons
Purple Bacteria (non- sulphur)Simple and aromatic hydrocarbons

Every wastewater system is different

Sometimes greasetraps or septic systems can be grossly undersized for the volume they are expected to process.  This could be due to the fact that the original system was designed for a much smaller loading than what it currently receives.  Another cause for failure can be too much food waste entering the drains when it should be scraped off into the rubbish bin.

This all makes it difficult to recommend a guaranteed dosing program based simply on the size of your greasetrap or septic tank.  Contact Parklink today to discuss your situation with one of the team and ensure you’re dosing the correct amount.